Agilent Technologies E4419B User Manual page 150

3 Menu Reference
•
•
•
•
128
A Freq
Press this softkey to enter the frequency of the signal to be measured on
channel A, in the range of 0.001 MHz to 999.999 GHz. The default value is
50 MHz. Use the
confirm your choice, press the appropriate frequency unit. Entering a
frequency using this softkey is only possible when you have a sensor
calibration table or frequency dependent offset table selected, or you are
using an Agilent E-Series power sensor or N8480 Series power sensor
(excluding Option CFT).
A Cal Fac
Press this softkey to enter the measurement calibration factor for
channel A in the range of 1% to 150%. The default value is 100%. Use the
, , , and
your choice, press
%
only possible when you are using an Agilent 8480 Series power sensor or
N8480 Series power sensor with Option CFT.
B Freq
Press this softkey to enter the frequency of the signal to be measured on
channel B, in the range of 0.001 MHz to 999.999 GHz. The default value is
50 MHz. Use the
confirm your choice, press the appropriate frequency unit. Entering a
frequency using this softkey is only possible when you have a sensor
calibration table selected or you are using an Agilent E-Series power sensor
or N8480 Series power sensor (excluding Option CFT).
B Cal Fac
Press this softkey to enter the measurement calibration factor for channel B
in the range of 1% to 150%. The default value is 100%. Use the
, and keys to change the calibration factor. To confirm your
choice, press . Entering a calibration factor using this softkey is only
%
possible when you are using an Agilent 8480 Series power sensor or N8480
Series power sensor with Option CFT.
, , , and
keys to change the calibration factor. To confirm
. Entering a calibration factor using this softkey is
, , , and
keys to change the frequency. To
keys to change the frequency. To
E4419B Power Meter User's Guide
, ,