Dynamic Model Mapping Algorithm Settings - Newport iServer MicroServer iTHX-M Operator's Manual

Dynamic Model Mapping Algorithm Settings

All signed ranks above 10.5 (a total of 5) are given a weight of 1 and
signed ranks equal to 10.5 (a total of 4) are given a weight of 0.5.
In our example:
1 ∗ 5 0.5 ∗ 4
( ) (
+
ρ 10.5 ( )
= -------------------------------------- -
32
The Dynamic Model mapping algorithm incorporates user modifiable
settings which influence call rate and call accuracy. The default
settings are set to allow high call rates with better than 99% accuracy.
Care should be taken when changing these settings as adjusting the
parameters to increase call rates may decrease the accuracy
). The table below explains the settings and how changing a value
affects the analysis.
To view the user-modifiable algorithm settings, click the
1.
Mapping Algorithm Settings button
bar; or
Select Tools Mapping Algorithm Settings from the menu
bar.
The Mapping Algorithm Settings dialog box opens
Figure C.6
Mapping Algorithm Settings dialog box, Dynamic Model Mapping settings
deposed
Appendix C | Dynamic Model Mapping Algorithm
)
= 0.21875
Select array type here
Enter a new value for
the selected item here
351
(seepage 352
in the Settings shortcut
(Figure C.6).