Newport iServer MicroServer iTHX-M Operator's Manual page 207

CREATING VIRTUAL SETS
You can remove array types by selecting them and clicking
the << Remove button.
You can remove all selected array types by clicking the
<< Remove All button.
Click Save to save the Virtualset Definition.
B.
The definition is saved and can be used to group data.
To delete a definition:
Select the definition in the VirtualSet Name list.
1.
Click Delete.
2.
To select data for display in a virtual array set:
Select multiple mapping analysis data from different arrays in the
1.
data tree (see page 141)
The VirtualSet Creation dialog box opens
Figure 6.17
VirtualSet Creation dialog box
Select a VirtualSet definition from the list;
2.
Or, click Define New VirtualSet Rule... to create a virtual set
definition (see Defining a VirtualSet Rule, on page
Click OK.
3.
The mapping analysis window displays the data for each virtual
array in a single column in the SNP table
Chapter 6 | Working with Mapping Data
or Open dialog box
(Figure
(Figure
199
(see page 142).
6.17).
195).
6.18).