Newport iServer MicroServer iTHX-M Operator's Manual page 253

1. Use the dialog box toolbar to locate the directory and enter
the file name.
2. Click Save.
The path and data file name appear in the textbox.
(Merlin format only) Enter the path and file name in the
B.
Chromosome Map textbox; or,
Click Browse.
The Save As dialog box opens.
Use the dialog box to locate the directory and enter the file
1)
name.
Click Save.
2)
The path and data file name appear in the textbox.
Enter the path and file name in the Pedigree File textbox; or
C.
Click Browse.
The Open dialog box opens.
Use the Save As dialog box to locate the directory and enter
1)
the file name.
Click Save.
2)
The path and data file name appear in the textbox.
(GeneHunter open source software format only) Enter the
D.
values for Max Num of SNPs per file and Overlap SNP
region (cM).
(Merlin format only) Select or deselect the Separate file for
E.
each Chromosome checkbox, as desired.
Click Export to begin the export.
F.
The data is exported to the specified directory. In addition, the
SNP Statistics report is created in the directory with the other
exported data; the report contains summary information
showing the associations of the experiment with the sample.
For more information about the report, see
on page 246.
Chapter 6 | Working with Mapping Data
SNP Statistics Report,
245