Newport iServer MicroServer iTHX-M Operator's Manual page 273

.
Figure 8.2
Add Cell Intensity Data dialog box
Select the cell intensity data for the sample that you want to view
3.
and click OK.
You can select cell intensity data for up to ten samples at a time. If
you wish to display data for additional samples, you will have to
select them in separate operations.
The Probe Intensity window displays the selected cell intensity
data.
The feature selected in the Mapping window is automatically
selected in the Probe Intensity Table, and the intensity values for
that feature are displayed in the Intensity Plot.
To open the Probe Intensity window and select cell intensity data for
display:
Click the Probe Intensity window button
1.
shortcut bar, or select Run
bar.
The Add Cell Intensity Data dialog box opens
Chapter 8 | Probe Intensity Window
in the Tools
Probe Intensity from the menu
(Figure
265
8.2).