Mpam Mapping Algorithm Settings - Newport iServer MicroServer iTHX-M Operator's Manual

REFERENCES

MPAM Mapping Algorithm Settings

The HCR bound can be adjusted using the HCRBound parameter.
For more information, see
Refer to the appropriate tech note for more information about the
MPAM mapping algorithm.
The MPAM mapping algorithm incorporates user modifiable settings
which influence call rate and call accuracy. The default settings are set
to allow high call rates with better than 99% accuracy. Care should be
taken when changing these settings as adjusting the parameters to
increase call rates may decrease the accuracy.
settings and how changing a value affects the analysis.
When you first perform the MPAM mapping algorithm, you may
need to enter values for gender attributes (for more information,
see
Using the Gender Attribute Values, on page 130
To view the user-modifiable algorithm settings, click the
1.
Mapping Algorithm Settings button
shortcut bar.
or,
Select Tools
2.
bar.
The Mapping Algorithm Settings dialog box opens
Appendix B | MPAM Mapping Algorithm
MPAM Mapping Algorithm Settings
Mapping Algorithm Settings from the menu
.
explains the
Table B.1
).
in the Settings
(Figure B.7).
331