Getting Started; Unpacking The Instrument - Viavi SmartClass OLP-87 Operating Manual

3
G
ETTING
OLP-87/OLP-87P
S
TARTED

Unpacking the instrument

Packing material
We suggest that you keep the original packing material. It is
designed for reuse (unless it is damaged during shipping). Using
the original packing material ensures that the instrument is
properly protected during shipping.
Checking the package contents
Unpack the instrument and check the package contents. For
J
more information see
Checking for shipping damage
After you unpack the instrument, check to see if it was damaged
during shipping. This is particularly likely if the packaging is
visibly damaged. If there is damage, do not attempt to operate
the instrument. Doing so can cause further damage. In case of
damage, please contact your local Viavi sales company.
Addresses can be found at www.viavisolutions.com.
Recovery following storage/shipping
Condensation can occur if a instrument that is stored or shipped
at a low temperature is brought into a warm room. To prevent
damage, wait until no more condensation is visible on the
surface of the instrument before powering it up. Do not operate
the instrument until it has reached its specified temperature
range and wait until it has cooled down if the instrument was
stored at a high temperature (see
page 85).
U
NPACKING THE INSTRUMENT
"Included items" on page
"General specifications" on
3 G S
ETTING TARTED
88.
17