A guided tour of your Seeker X
Front view
DISTANCE button
Changes the distance from the vehicle to the
cable plant
VOLUME button
Changes the speaker volume of the leakage
tone. Brief presses increase the volume to
maximum, then starts again at minimum.
SNAPSHOT button
Activates the Snapshot mode or press and
hold to synchronize data with the optional
Seeker MCA III when the meter is in the
Mobile Mount.
POWER button
Press and hold to turn the meter on or off.
When the meter is on, press to activate the
display's backlight for approximately 60
seconds.
CHANGE button
Toggles or alters the current display
selection. Also toggles frequency presets
from the measurement screen.
SELECT button
Advances to the next display mode
Feb 2020
Seeker X User's Guide
22137808, Rev. 001
Chapter 1 Quick Tour
23