Removing The Light Engine Liquid Cooling Module - Christie Crimson Series Service Manual

Upon re-install, orient the radiator in the bracket so the hoses are in the same position as the
old radiator.
11. Remove the radiator from the bracket and replace.
12. To re-install, repeat these steps in reverse order.

Removing the light engine liquid cooling module

Before replacing or refilling the coolant, the light engine liquid cooling module (LCM) must be removed
from the projector.
Warning! If not avoided, the following could result in death or serious injury.
• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
1. Remove the top cover (on page 42).
2. Remove the front cover (on page 41).
3. Disconnect the pump harness.
Crimson Service Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102733-02 Rev. 1 (01-2020)
Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved.
©
Ventilation and cooling
61