High Security Lid; Rear Right Skin (Ignitor/Blower Compartment) - Christie CP4230 Service Manual

5.4.3 High Security Lid

Remove the high security lid to access components in the
light engine and cardcage compartments. NOTICE! Only
Christie authorized service technicians should open
the high security lid.
(Estimated Replacement Time: 2 minutes)
1. Remove front top lid. Refer to
page 5-6.
2. Using the high security key, unlock the high security lid.
(Figure 5-3)
3. Lift the lid up and remove.

5.4.4 Rear Right Skin (ignitor/blower compartment)

The rear right skin is held in pace by three captive
screws. Removing this skin provides access to the
igniter, lamp blower, lamp blower interlock,
LVPS and AC relay.
(Estimated Replacement Time: 2 minutes)
1. Using a #2 Phillips
screws. (Figure 5-4)
2. Lift the skin up and out to remove.
CP4230 Service Manual
020-100622-04 Rev. 1 (05-2016)
5.4.2 Front Top Lid, on
, loosen the three captive
™
Section 5: Parts and Module Replacement
Figure 5-3 High Security Lid
Figure 5-4 Rear Right Skin
5-7