Lldp-Med Network Policy - ZyXEL Communications GS3700 Series User Manual

The following t able describes t he labels in t his screen.
Table 177 Advanced Applicat ion > LLDP > LLDP- MED Configurat ion
LABEL
Slot ( St acking
m ode)
Port
Not ificat ion
Topology
Change
MED TLV Set t ing
Locat ion
Net work Policy
Apply
Cancel

35.8 LLDP-MED Network Policy

Click Adva nce d Applica t ion > LLD P > LLD P- M ED N e t w or k Policy t o display t he screen as
shown next .
Figure 268 Advanced Applicat ion > LLDP > LLDP- MED Net work Policy ( St andalone m ode)
Chapter 35 Link Layer Discovery Protocol (LLDP)
DESCRIPTION
This field appears only in st acking m ode. Click t he drop- down list t o choose t he slot
num ber of t he Swit ch in a st ack.
This displays t he Swit ch's port num ber. Select * t o configure all port s ( in t he sam e
Swit ch) sim ult aneously. I n St acking m ode, t he first num ber m eans Slot I D and t he
second is t he port .
Select t o enable LLDP- MED t opology change t raps on t his port .
Select t o enable t ransm it t ing LLDP- MED locat ion TLV.
Select t o enable t ransm it t ing LLDP- MED Net work Policy TLV.
Click Apply t o save t he changes t o t he Swit ch's run- t im e m em ory. The Swit ch loses
t hese changes if it is t urned off or loses power, so use t he Save link on t he t op navigat ion
panel t o save your changes t o t he non- volat ile m em ory when you are done configuring.
Click Ca n ce l t o begin configuring t his screen afresh.
GS3700/XGS3700 Series User's Guide
366