Lldp-Med Network Policy - ZyXEL Communications XGS2220 Series User Manual

30/54-port gbe/sfp smart managed layer-3 switch
Table of Contents

Advertisement

The following table describes the labels in this screen.
Table 116 PORT > LLDP > LLDP > LLDP-MED Setup
LABEL
Port
*
Notification
Topology
Change
MED TLV Setting
Location
Network Policy
Apply
Cancel

35.9 LLDP-MED Network Policy

Click PORT > LLDP > LLDP MED > LLDP-MED Network Policy to display the screen as shown next.
Figure 174 PORT > LLDP > LLDP MED > LLDP-MED Network Policy
The following table describes the labels in this screen.
Table 117 PORT > LLDP > LLDP MED > LLDP-MED Network Policy
LABEL
Index
Port
Application Type
Tag
VLAN
DSCP
Priority
Chapter 35 Link Layer Discovery Protocol (LLDP)
DESCRIPTION
This displays the Switch's port number. Select * to configure all ports simultaneously.
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments to each port if necessary.
Changes in this row are copied to all the ports as soon as you make them.
Select to enable LLDP-MED topology change traps on this port.
Select to enable transmitting LLDP-MED location TLV.
Select to enable transmitting LLDP-MED Network Policy TLV.
Click Apply to save the changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This field displays the of index number of the network policy. Click an index number to edit
the rule.
This field displays the port number of the network policy.
This field displays the application type of the network policy.
This field displays the Tag Status of the network policy.
This field displays the VLAN ID of the network policy.
This field displays the DSCP value of the network policy.
This field displays the priority value of the network policy.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
XGS2220 Series User's Guide
243

Advertisement

Table of Contents
loading

Table of Contents