ZyXEL Communications GS3700 Series User Manual page 50

Chapter 5 ZON Utility, ZON Neighbor Management and Port Status
Figure 20
St at us > Neighbor
The following t able describes t he fields in t he above screen.
Table 7 St at us > Neighbor
LABEL DESCRIPTION
Local
Port This shows t he port of t he Swit ch, on which t he neighboring device is discovered.
Desc. This shows t he port descript ion of t he Swit ch.
PoE Draw This shows t he consum pt ion t hat t he neighboring device connect ed t o t his port draws
from t he Swit ch. This allows you t o plan and use wit hin t he power budget of t he
Swit ch.
Rem ot e
Port This show t he num ber of t he neighbor device's port which is connect ed t o t he Swit ch.
Desc. This shows t he descript ion of t he neighbor device's port which is connect ed t o t he
Swit ch.
Model This shows t he m odel nam e of t he neighbor device. This field will show " - " for non-
ZyXEL devices.
Syst em Nam e This shows t he syst em nam e of t he neighbor device.
Locat ion This shows t he geographic locat ion of t he neighbor device.
Firm ware This shows t he firm ware version of t he neighbor device. This field will show " - " for
non- ZyXEL devices.
I P This show s t he I P address of t he neighbor device. The I P address is a h ype r lin k t hat
you can click t o log int o and m anage t he neighbor device t hrough it s web configurat or.
This field will show " - " for non- ZyXEL devices.
MAC This shows t he MAC address of t he neighbor device. This field w ill show " - " for non-
ZyXEL devices.
PWR Cycle Click t he Cycle but t on t o t urn OFF t he power of t he neighbor device and t urn it back
ON again. A count down but t on ( from 5 t o 0) st art s.
Note: The Swit ch must support power sourcing (PSE) or the network device is a
Note: If multiple neighbor devices use the same port, the Cycle button is displayed only
Reset t o Default Click t he Re se t but t on t o reset t he neighbor device t o it s fact ory default set t ings. A
warning m essage " Ar e you su r e you w a nt t o loa d fa ct or y de fa u lt ?" appears
prom pt ing you t o confirm t he act ion. Aft er confirm ing t he act ion a count down but t on
( from 5 t o 0) st art s.
Note: The Swit ch must support power sourcing (PSE) or the network device is a
Note: If multiple neighbor devices use the same port, the Reset button is not available
Note: You can only reset ZyXEL products.
powered device (PD).
on the first device, others will show "-" instead.
powered device (PD).
and will show "-" instead.
GS3700/XGS3700 Series User's Guide
50