Mounting The Switch On A Rack - ZyXEL Communications GS3700 Series User Manual

7
Slide t he rear bracket along t he rail and set t he bracket in place depending on t he dept h of t he rack.
The rear bracket s can be used wit h a 19- inch rack.
You m ay now m ount t he Swit ch on a rack. Proceed t o t he next sect ion.

2.5 Mounting the Switch on a Rack

Use t he M6 rack screws ( larger t han t he M4 screws) t o m ount t he Swit ch wit h bracket s on t he rack.
1 Posit ion a front m ount ing bracket ( t hat is already at t ached t o t he Swit ch) on one side of t he rack,
lining up t he t wo screw holes on t he bracket wit h t he screw holes at t he front of t he rack.
2
Use a screwdriver t o inst all t he rack screws t hrough t he m ount ing bracket holes int o t he rack.
3 Repeat st eps
4 Posit ion a rear m ount ing bracket ( t hat is already at t ached t o t he Swit ch) on one side of t he rack,
lining up t he t wo screw holes on t he bracket wit h t he screw holes at t he rear of t he rack.
5 Use a screwdriver t o inst all t he rack screws t hrough t he m ount ing bracket holes int o t he rack.
6 Repeat st eps
Chapter 2 Hardware Installation and Connection
1 and 2 t o at t ach t he ot her front m ount ing bracket on t he ot her side of t he rack.
4 and 5 t o at t ach t he ot her rear m ount ing bracket on t he ot her side of t he rack.
GS3700/XGS3700 Series User's Guide
Front Bracket
28
Rear Bracket
Sliding Rail