Data Logging; General; Configuring - BEAMEX MC5-IS User Manual

Data Logging

General

Configuring

Assigning Measurement Ports to Channels
The Data Logging utility is a firmware option that allows you to
collect data using MC5-IS. The collected data may then be viewed,
transferred to a personal computer (PC) and printed using a utility
shipped together with MC5-IS if the Data Logging option is pur-
chased.
The maximum amount of measuring channels can be up to seven
(valid only if your MC5-IS includes a sufficient amount of measur-
ing modules/ports).
Data Logging may be configured to collect data using different
triggers and saving methods as described further on.
To start configuring the Data
Logging (starting from Basic
Mode), press
Menu
D
/ ,
Others
C
/ ,
Data Logging
5
/
The upper part of the Data Log-
ging configuration window is re-
served for seven measurement
channels and the lower part for
general settings. The following
subchapters describe how they
are configured.
Move the cursor to one of the meas-
urement channel rows in the Data
Logging configuration window.
Edit
C
Press / to open the following
channel settings window: Select
the measurement port first. The
other settings depend on the port
setting. To clear a channel, select
None
port in the channel settings
window. To remove all channel set-
MENU
D
tings, select /
Channels
in the Data Logging con-
figuration window.
Advanced Utilities
1
2 None
3 None
4 None
5 None
.
6 None
7 None
Trigger
Save Method
Interval [s]
Samples
Time [h min s]
Basic
Mode
Channel
Port
Pressure Type
Unit
Clear All
1
, /
Cancel
20.10.2000 14:57
DATA LOGGING SETUP
None
Periodic
Instant Value
2
10
0 0
Data
Edit
Logging
20.10.2000 15:01
DATA LOGGING SETUP
1
P3:B
Abs
bar
Edit
20
MENU
OK
83