Other Connectable Devices
Firmware Options
24
General
MC5-IS' connector for External Pressure Modules (EXT) allows the
use of additional pressure modules. This possibility increases the
measurable pressure range from the range available using only the
internal modules.
The standard firmware shipped with MC5-IS is capable of perform-
ing all normal measurement, generation/simulation and calibration
tasks. The optional tools give you additional features that enhance
MC5-IS' functionality.
The following firmware options are already available (valid when
this manual was printed):
•
Special temperature sensors
•
Communication with QCAL® software
•
HART communication (Requires the E module)
•
Multichannel datalogging