Calibration Instructions Page; Deleting Instruments - BEAMEX MC5-IS User Manual

Calibration Instructions Page

Deleting Instruments

Maintaining MC5-IS' Instrument Database
In addition to the actual instrument
data, there are three note fields.
Starting Guide, Adjusting Guide
and Finishing Guide. They can be
used to provide the calibrating tech-
nician with any kind of instructions
that may be practical during the
calibration procedure. The note
texts may be written in MC5-IS or
they can be downloaded from a
calibration software. On this page,
the three first rows of the note texts
are shown, but when viewed dur-
ing calibration each note may be
as long as a full sized text window.
The fields on the Instructions Page need not be utilized, but if they
include any text they will be shown at the appropriate stage of the
calibration.
If you want to free some memory or otherwise do not need certain
instrument data anymore, you may remove instruments from MC5-
IS' memory as follows:
To remove all instruments (and their calibration data), open the
Position List and press
the leftmost picture below).
25.09.2000 10:16
POSITION/DEVICE ID
101-XI-001.1
112-TT-003.1
112-TT-007.1
PT101.6
PT112.12
PT115.15-1
PT115.15-2
PT112.16
TT112.08
TT112.10
TT112.12
Device ID
TT112.07
Position Name
Intake Temperature on Feed 1
Calibrated
Not Calibrated
Basic
Select
Mode
To remove a single instrument (and its calibration data), select it
from the Position ID list. When viewing the instrument window, press
Menu Delete Instrument
D 2
/ and /
above).
Menu Delete All Instruments
D 6
/ , /
Create New
Instrument
Transfer Function Linear
Cal. Points
INPUT
Method
Sensor Type
Delete All
OUTPUT
Instruments
Method
Close
MENU Back
MENU
03.10.2000 13:52
CALIBRATION INSTRUCTIONS
Starting Guide
Required tools: Pressure pump or
a Pressure Controller
Adjustment Guide
Remember the "Do not Adjust if" limit...
Finishing Guide
Clean up after your work!
Next
Save Edit
page
25.09.2000 10:20
View
INSTRUMENT
Instrument
112-TT-003.1
Details
Intake Temperature on Feed 1
Delete
Instrument
View
5 ↑↓
Calibration
Results
0.00 ... 100.00 °C
Simulated
Pt100 α385
4.0000 ... 20.0000 mA
Measured
Close
Edit Calibrate MENU
MENU
(see the rightmost picture
MENU
(see
123