Maintaining Mc5-Is' Instrument Database; Adding New Instruments - BEAMEX MC5-IS User Manual

Maintaining MC5-IS' Instrument
Database

Adding New Instruments

Maintaining MC5-IS' Instrument Database

This chapter and its subchapters describe how to create instruments,
edit instrument data and delete instruments.
Adding instruments to MC5-IS' database by downloading the in-
struments from an external calibration database software is not pre-
sented here. When using such a software, consult the Instruction
Manual of the software.
MC5-IS' memory is dynamic. There are no fixed amount instruments
and calibration data that you may keep in MC5-IS' memory. It all
depends on how many calibration repeats and how much history
data is kept in the memory.
Normally, you can safely store some hundreds of instruments and
their calibration results without having "out of memory" messages.
If you want to delete instruments or calibration data from MC5-IS'
memory, see chapters Deleting Instruments on page 123 and
Deleting Calibration Results on page 125.
If you go to Calibration Mode, but
there are no instruments in MC5-
IS' database, the Position ID list is
empty except for the possibility to
create a new instrument. Select the
or the key to create a new
instrument. If the Position ID list is
not empty, you can add new instru-
ments by selecting
Create New Instrument.
1
/
MENU
D
/ and
03.10.2000 08:51
POSITION/DEVICE ID
Create New Instrument...
Device ID
Position Name
Calibrated
Basic
Select
Mode
MENU
119