Typographical Conventions; Unpacking And Inspection - BEAMEX MC5-IS User Manual

Typographical Conventions

Unpacking and Inspection

All examples of user interface texts are printed using
Black
, e.g.
Selected port:
All front panel texts (fixed texts on MC5-IS' cover) are printed
using , e.g.
8 pt Eurostile
Connectors marked
Function and Menu keys are often referred to using both the key
name in
8 pt Eurostile
displayed on the screen in
Function key
At the factory each new MC5-IS passes a careful inspection. It should
be free of scrapes and scratches and in proper operation order
upon receipt. The receiver should, however, inspect the unit for any
damage that may have occurred during transit. If there are signs of
obvious mechanical damage, package contents are incomplete, or
the instrument does not operate according to specifications, con-
tact the purchasing sales office as soon as possible. The standard
accessories are as follows:
•
Calibration Certificate
•
This User Guide and a leaflet entitled "Safety Information for Beamex
MC5-IS Intrinsically Safe Multifunction Calibrator"
•
Warranty Card
•
Battery Pack, NiMH
•
Charger for the Battery Pack
•
Computer communication cable
•
If any internal pressure modules are present:
A pressure hose set
•
If the E module is present: Two test leads and clips
•
If the ET module is present: Four additional test leads and two clips
For a description of available hardware and software options, see
MC5-IS' Modularity and Options on page 23.
If you have to return the instrument to the factory for any reason,
use the original packing whenever possible. Include a detailed de-
scription of the reason for the return.
Warning:
The accessory polyurethane hose supplied with the calibrator
is rated to the maximum pressure of 20 bar at 21°C (290 psi at
70°F). Applying higher pressure can be hazardous.
Introduction
ET: TCi(mea)
T/C, Low V
and the corresponding text (function)
8 pt Arial Black
Menu
/
D
8 pt Arial
, e.g.
3