Displaying Values In Percentage; Displaying Error Values - BEAMEX MC5-IS User Manual

Displaying Values in Percentage

Displaying Error Values

In Percentage Display Mode the
measured/generated/simulated
values are displayed as percent-
age of a user defined range.
Start the Percentage Display Mode
as described in chapter Display
Mode Settings on page 77 and
Measured Range
enter the
The true value is displayed in the
Extra Info row.
The Error Display Mode utilizes
both of Basic Mode's windows.
The measured/generated/simul-
ated values of both windows are
treated as percentages of user
defined ranges. The input value is
considered as the "correct" value
and the output value should fol-
low the input value, while taking
Transfer Function
the
count.
The window from which Error Dis-
play Mode is invoked is consid-
ered as the instrument's output
signal and the other window as
the input signal.
Start the Error Display Mode as described in chapter Display Mode
Settings on page 77. Enter the
input and the output signal, the
Transfer Function
the
The true output value is displayed in the Extra Info row.
Note.
The Error Display Mode is only available for a Basic Mode window
set for measuring a quantity.
Advanced Utilities
26.04.2002 14:21
Quantity
Port
Measured Range
.
Cancel
26.04.2002 14:29
Window
INPUT
Port
Measured Range
Window
OUTPUT
Port
Measured Range
into ac-
Error Calc. Method
Transfer Function
Cancel
Measured Range
Error Calculation Method
(input/output correlation).
PERCENTAGE
Pressure
P1:INT2C
0 % kPa
0.000
100 % kPa
100.000
Stop
Field Edit Start
Ramping
ERROR DISPLAY
1
Pressure
P1:INT2C
0 % 0.000 kPa
100 % kPa
100.000
2
Current
E: I(meas)
0 % mA
4.000
100 % 20.000 mA
% of span
Linear
Stop
Field Edit Start
Ramping
for both the
and
79