Alarm Limit Settings - BEAMEX MC5-IS User Manual

Alarm Limit Settings

Each main measurement in a window may have alarm limits set-
tings. MC5-IS supports "higher than", "lower than", "high rate" and
"low rate" alarms.
To set the alarm limits, open the window settings menu of the win-
dow where the measurement is active (starting from the Basic Mode:
Menu
/ followed by
D
needed). As the alarm setting command is located in the window
setup's submenu, select the numerical key
1 0 . 0 4 . 2 0 0 2
P 1 : I N T 2 C / - 1 . 0 0 0 0 0 0 . . . 2 b a r
E : C u r r e n t M e a s u r e m e n t
Open the alarm
setting window
by selecting
Alarm
/ .
2
Q u a n t i t y
P o r t
A l a r m s a c t i v a t e d
A l a r m , w h e n t h e M e a s u r e m e n t
a n d / o r
A l a r m , w h e n t h e R a t e o f C h a n g e
a n d / o r
Alarm Limit Settings
Window 1 Setup
/
A
1 5 : 5 6
A L A R M S E T T I N G S
° C
Window 2 Setup
or /
B
to open the submenu.
if
71