Voltage Measurement; Rtd Measurement (Temperature) - BEAMEX MC5-IS User Manual

Startup and Basic Operation
Note.
MC5-IS has a comprehensive set of predefined sensor types. Addi-
tional sensor types are available as options.
Warning!
R, RTD
If you connect an RTD sensor to the ET module's con-
nectors, there is no galvanic isolation between the thermo-
couple and the RTD sensor.
Next...
Thermocouple Simulation on page 65
RTD Measurement (Temperature) on page 48
Voltage Measurement on page 40
Special Measurements on page 51.
Alarm Limit Settings on page 71.
Calibration, see Part D.
Problems with thermovoltage measurement? See Error situations
on page 94.
50