Calibrating an Instrument
Selecting the Instrument to Be Calibrated
104
Calibration
To move from Basic Mode to Cali-
bration Mode, press the
tion Mode
Function Key. A list of
instruments available in MC5-IS'
memory is presented. If you do not
have any instrument data in MC5-
IS' memory, either download them
from a calibration software or cre-
ate instruments in MC5-IS as de-
scribed in chapter Adding New In-
struments on page 119. The Posi-
tion ID / Device ID of an already
calibrated instrument is tick-marked
( )
When you move the cursor (the inverted text), the additional data
presented in the lower part of the screen changes to reflect the data
of the current instrument.
Select one of the available instruments by pressing the
Select
C
the
/
key.
Note.
If there are a lot instrument data in MC5-IS' memory, displaying the
list may take a few seconds.
25.09.2000 10:16
Calibra-
A
/
101-XI-001.1
112-TT-003.1
112-TT-007.1
PT101.6
PT112.12
PT115.15-1
PT115.15-2
PT112.16
TT112.08
TT112.10
TT112.12
Device ID
TT112.07
Position Name
Intake Temperature on Feed 1
Calibrated
Not Calibrated
Basic
Mode
POSITION/DEVICE ID
Select
MENU
,
or