Mc5-Is' Support For Instrument Adjustment - BEAMEX MC5-IS User Manual

MC5-IS' Support for Instrument Adjustment

118
Calibration
MC5-IS includes a special utility for
adjusting instruments. This tool is
of use when MC5-IS generates/
simulates the input signal or con-
trols an external device that gener-
ates/simulates the input signal (au-
tomatic calibration). Use the stan-
dard calibration screen when ad-
justing instruments that are cali-
brated manually. When viewing the
three Calibration Windows, open
the adjustment utility by pressing
Adjust
C
the / Function Key. Press
the Function Keys
quickly change the value of the in-
put signal.
Additionally, the input signal field is editable during instrument ad-
justment. This makes it possible for you to enter generation/simula-
tion values other than the ones available via the Function Keys.
Hint.
For help on how to adjust/trim HART instruments, see Appendix 1.
B C D
, and to
25.09.2000 11:00
Input RTD Temperature [ET: Simul]
Pt100 α385
100.00
°C (ITS90)
Output
Current [E: Meas]
19.9918
mA
Error
1.00 -0.05 % of span
+
0
-
0% 50%
0% 50%
Back
100%
100%