Disconnecting A Hart Instrument; Device Information - BEAMEX MC5-IS User Manual

Disconnecting a HART Instrument

Device Information

134
Appendix 1, User Guide for MC5 HART Option
The standard Window Setup menu
is replaced by a HART menu. This
menu is automatically opened af-
ter the HART instrument is se-
lected. All HART menu options are
described in the subsequent chap-
ters. The measurement quantity of
the window where the HART instru-
ment was selected to is automati-
cally changed to the quantity of the
HART instrument's Digital Output
(PV).
The HART instrument is to be disconnected when you need to
change the Quantity of a window assigned for HART measurement.
To disconnect a HART instrument, select
Menu
D
/ , and
Window 2 Setup
B
/
Disconnect Device
1
/
The HART communication is terminated and the HART menu is
replaced by the standard Window Setup menu.
The adjacent picture displays the
data of the Device Info window.
The following fields are editable:
Tag,
Serial Number,
Descriptor
Message.
1
P1: INT400MC/-41.400...41.400 kPa
2
E: HART/PV
Window 1
if needed
.
and
11.04.2002 8:30
Pressure
Disconnect
Device
gauge
0.087
Device
kPa
Information
Device
Settings
Unit
[kPa]
Pressure
0.084
kPa
Trim
Instrument
Add HART
Instrument
to Database
Window 2
Others
Setup Setup
11.04.2002 8:35
HART DEVICE INFORMATION
Tag
3051C
Device ID
1109949
Serial Number
7292301
Manufacturer Rosemount
Device Type 3051C
Software Version 5.3.176
Hardware Revision 1.0
Date 07.06.1999
Descriptor BEAMEX
Message JUST TESTING
Close
Close
MENU