Required Modules For Different Input/Output Signal Combinations - BEAMEX MC5-IS User Manual

Required Modules for Different Input/Output Signal Combinations

Table for choosing the input module
QUANTITY
Voltage
Low Voltage
Current
Resistance
Pressure
Temperature
TC temperature
RTD temperature Measured
Frequency
Value
102
Calibration
Consider the type of your instrument before doing a calibration:
•
What are the input and output quantities/ports?
•
Is the input signal measured, generated/simulated, controlled
or keyed (Input method)?
•
Is the output signal measured or keyed (Output method)?
Use the following tables find out the required modules for each sup-
ported input/output quantity and method:
METHOD REQ. MODULE
Measured
Generated
Keyed none
E measured
ET measured
Generated
Keyed none
Measured
E sink
ET sink
Keyed none
Measured
Simulated
Keyed none
Measured
INT or EXT
Keyed none
Keyed none
Measured
Simulated
Simulated
Measured
Generated
Keyed none
Keyed none
Table for choosing the output module
QUANTITY
E Voltage
ET
E Low Voltage
ET
ET
E Current
E
ET
Resistance
ET
ET
Pressure
Temp.
ET
ET TC temperature
ET
ET
E RTD temperature Measured
ET
Frequency
Value
Switch
METHOD REQ. MODULE
Measured E
Keyed none
HART E
E Measured E
ET Measured ET
Keyed none
HART E
Measured E
Keyed none
HART E
Measured
ET
Keyed none
HART
E
Measured INT or EXT
Keyed none
HART E
Keyed none
HART E
Measured ET
Keyed none
HART E
ET
Keyed none
HART
E
Measured E
Keyed none
HART
E
Keyed none
Measured
E