Safety; Ex Information And Approvals - BEAMEX MC5-IS User Manual

Safety

Ex Information and Approvals

MC5-IS' case is water/dust proof (IP65). The battery pack does
however have holes to enable proper ventilation and heat transfer.
So be careful when working in wet conditions.
Opening of the casing of MC5-IS is not allowed due to ATEX safety
reasons.
The materials of MC5-IS' case withstand normal industrial condi-
tions. MC5-IS endures shocks with the help of the built in impact
protectors
Internal pressure modules with a measuring range of 6 bar (90 psi)
or less are overpressure protected. If the measurement pressure of
a pressure module exceeds the module's maximum pressure value,
the overpressure protector vents excess pressure through a hole in
the rear of the case.
Please read the separate leaflet entiled (in English) Safety Infor-
mation for Beamex MC5-IS Intrinsically Safe Multifunction Cali-
brator. The leaflet includes the same safety information in several
languages.
Ex Approvals:
ATEX
0537
II 1 G
EEx ia IIC T4
(Ta = -20 ... 50°C)
VTT 07 ATEX 033X
Safety
IEC
Ex ia IIC T4 Ga
(Ta = -20 ... 50°C)
IECEx VTT 07.0002X
25