Applied Operation By I/O Signals - Toshiba TOSVERT VF-AS3 Instruction Manual

7. 2
You can assign the functions to the digital input terminals. The assigned functions can be switched for
operation.
Also, you can assign the functions to the digital output terminals and the relay logic output terminals to
output signals to external equipment.
For the digital terminals, sink logic and source logic can be switched with the slide switch [SW1]. For
details, refer to [2. 3. 5].
7. 2. 1
Signals are input to the digital input terminals from an external programmable controller. The signals
4
are used for operating the inverter and switching the functions.
The digital input terminal functions can be selected from a variety of functions, thus allowing flexible
4
compatibility with system design.
■ Configuration of the control terminal block
4
7
9
■ Function setting for the digital input terminals
Terminal
symbol
F
R
7. Operating using external signals

Applied operation by I/O signals

Setting the functions to the input terminals
(for sink logic)
Title
F111 Terminal F function 1
F151 Terminal F function 2
F155 Terminal F function 3
F112 Terminal R function 1
F152 Terminal R function 2
F156 Terminal R function 3
Parameter name
7-2
E6582062
Adjustment range
2
*1
0 - 203
0
0
4
*1
0 - 203
0
0
Default
setting