Toshiba TOSVERT VF-AS3 Instruction Manual page 119

(1) Copying to LCD (uploading)
(1) Select "Copy to the keypad" and press the [OK] or
[F2] key.
(2) Set a figure 0 - 99 after the inverter type followed
by #, and press the [OK] or [F2] key.
(3) The highlighted part is the file name. In the follow-
ing example, "VFAS3-2037P#1" is the file name.
(4) When you press the [OK] or [F2] key, copying of
the parameters of the inverter body to the file
(memory) of the LCD body is started.
(5) When the transfer is completed normally, the file
name and CRC are displayed.
Copy to the drive
Copy to the keypad
Top
VFAS3-2037P#1
Top
The copy will start when OK-key is pushed.
Top
Top
3-15
3. [Basic operation] Operation panel and screen display
E6582062
STOP 0.0Hz F
Copy function
Return
STOP 0.0Hz F
Copy to the keypad
Set the file number after #.
Return
STOP 0.0Hz F
Copy to the keypad
VFAS3-2037P#1
Return
Transferring...
F
STOP 0.0Hz
Copy to the keypad
The copy has been completed.
VFAS3-2037P#1
CRC=FA1C
Return
R
15:20
R
15:20
3
R
15:21
9
10
R
15:21