Toshiba TOSVERT VF-AS3 Instruction Manual page 106

• [ESC] key
This key switches the display mode.
It is also used to return to the previous item of the hierarchy of the screen.
• [HAND/AUTO] key
This key switches between hand (operation panel)/remote (remote control).
It is used to operate the inverter temporarily at hand (operation panel) while performing terminal operation
(remote control) normally.
To enable this key, set the parameter <F750: EASY key function>.
For details, refer to [6. 37].
• [RUN] key
This key is used for a run command from the operation panel.
3
To enable this key, set "1" to the parameter <CMOd: Run command select>.
For details, refer to [5. 2. 1].
• [FWD/REV] key
This key switches between forward run and reverse run of the motor during panel run.
It is enabled when the parameter <CMOd: Run command select> is "1" and <Fr: Panel Fwd/Rev run
select> is "2" or "3".
For details, refer to [5. 3. 9].
• [i] key
This key displays information.
When "Website (QR code)" is selected, the information is QR code. When "Model information" is
selected, model information is displayed.
Necessary information is displayed when a trip occurs.
9
And you can see QR code for the parameter information when the parameter is selected or edited.
■ Model information
You can check the following model information.
- Type-Form
- Multi-rating select
- Inverter rated voltage
- Rated output capacity
- Rated output current
- CPU 1 version
- CPU 2 version
- Serial No.
- Region setting
3. [Basic operation] Operation panel and screen display
Type-Form
Multi-rating select
Inverter rated voltage
Rated output capacity
Rated output current
Top
3-2
E6582062
STOP 0.0Hz F R
16:32
Model information
VFAS3-2037P
HD rating (150%-60s)
200V
3.70kW-5.0HP
18.7A
Return Monitor