Toshiba TOSVERT VF-AS3 Instruction Manual page 602

Message
display
nErr
OFF
PASS
rJOG
rtry
SEt
Srvo
4
Std
4
StOP
tUn
tUn2
8
U---
9
U--F
Undo
U--r
USA
13
13. Trip information and measures
English
No error No trip records in the past trip history on
[Monitor mode].
Standby OFF The input terminal with assigned standby is
OFF.
Password Entered number in <F739: Password
coincidence verification> matched <F738: Password
setting>.
Rev JOG Reverse jog run in progress.
During Retry/Speed Retry/speed search in progress.
search
Region setting • Display at first power on.
acceptable • Display after setting <SEt> = "0".
During servo lock Servo lock in progress.
Setting mode Switched to [Setting mode].
During deceleration Deceleration stop at power failure in
stop at power failure progress.
During learning Learning the brake sequence or light-load
high-speed operation in progress. ("tUn1"
and the output frequency are alternately
displayed)
Light-load high- Error exists in learning operation.
speed learning
setting error
Waiting for search Waiting for search condition in <Changed
parameters search & edit>.
During forward Forward search in progress in <Changed
search parameters search & edit>.
All key unlocked When "Locked" is set in <F737: Panel keys
lockout>, pressed [OK] key for five seconds
or more.
During reverse Reverse search in progress in <Changed
search parameters search & edit>.
Setting for North Setting for North America is selected in the
America setup menu.
Description
-
-
-
-
-
Set a region to use in the setup menu.
-
-
A message indicates deceleration stop
during power failure. The stop state is kept
until the run command is turned OFF.
-
Refer to Operation Manual, and perform
learning operation.
-
-
The key operation on the operation panel is
temporarily valid.
-
-
13-12
E6582062
Remarks