Toshiba TOSVERT VF-AS3 Instruction Manual page 80

■ With frame size A1
VFAS3-2004P to 2022P, VFAS3-4004PC to 4037PC
1 Remove the front cover.
For how to remove, refer to [2. 2. 1].
2 Remove two screws for switching of grounding
capacitor.
The grounding capacitor is disconnected.
Mount the removed screws to the positions shown
in the figure on the right and tighten them.
2
3 To recover the shipping state, mount the two
screws for switching of grounding capacitor and
tighten them.
The
grounded.
4 After switching, mount the front cover.
For how to mount, refer to [2. 2. 1].
Important
9
2. Installation and wiring
grounding capacitor is
• For models with two switching screws, be sure to set both screws to the same side.
Grounding
Screw
Non-grounding
connected and
2-46
E6582062
Screw