Toshiba TOSVERT VF-AS3 Instruction Manual page 143

■ With parameters for which a value should be set
For an example, here is a procedure to set the basic parameter <ACC: Acceleration time 1>.
At that time, the current setting value, unit, setting lower limit (Min:), and setting upper limit (Max:)
are displayed.
1 Change the value with the touch wheel.
When you touch the touch wheel, the value is
highlighted, and you can change setting. When
highlighted, the setting value is being changed.
With the [F1] to [F4] keys, the following digits are
changed.
Key Display
F1 x 1000
F2 x 100
F3 x 10
F4 x 1
2 Press the [OK] key.
The setting value is changed, and the screen
display returns to the previous one.
• For details of the function and adjustment range of <ACC: Acceleration time 1>, refer to [5. 2.
Memo
4].
Meaning
Change the digit that is the minimum digit x
1000
Change the digit that is the minimum digit x
100
Change the digit that is the minimum digit x 10
Change the minimum digit of the value
displayed
4-19
STOP 0.0Hz
ACC :Acceleration time 1
25.0
Min: 0.0 Max: 6000.0
X1000 X100 X10
Digit to be changed in this
example
100 sec
10 sec
1 sec
0.1 sec
STOP 0.0Hz
Easy Mode
: Run command select
CMOd
: Frequency command select 1
FMOd
: Acceleration time 1
ACC
: Deceleration time 1
dEC
: Upper limit frequency
UL
Top
4. [Basic operation] Operation methods of motor
E6582062
15:12
s
3
X1
4
9
15:12
0
1
25.0s
10.0s
60.0Hz
Monitor