Toshiba TOSVERT VF-AS3 Instruction Manual page 454

Terminal
symbol
Common
4
4
4
7
9
*1 The default setting value is depending on the setup menu. Refer to [5. 3. 10].
*2 Indicated optional terminals on IO extension 1 (ETB013Z), refer to E6582128.
*3 If stable operation cannot be achieved because of noise of the frequency command circuit, etc., increase the value for <F209: Analog input
filter>.
For details on switching two types of analog signals for operation, refer to [5. 4. 1].
7. Operating using external signals
Title Parameter name
F209 Analog input filter
A959 Analog input function target
11
A961 Analog function setting
destination 11
A962 Analog input function target
21
A964 Analog function setting
destination 21
Adjustment range
1: Disabled
2 - 1000 (ms)
0: Disabled
1: Terminal RR
2: Terminal RX
3: Terminal II
4: Terminal AI4
5: Terminal AI5
0: Disabled
1: Acc/Dec rate (ACC.dEC etc.)
2: Upper limit frequency (UL)
3: Acc multiplication factor (FH/
ACC etc.)
4: Dec multiplication factor (FH/
dEC etc.)
5: Manual torque boost (vb etc.)
6: Stall prevention level (F601 etc.)
7: Motor OL protection current
(tHrA)
8: Speed control response (F460
etc.)
9: Droop gain (F320 etc.)
10: PID proportional gain (F362
etc.)
11: Base frequency voltage (VL
etc.)
12 - 20: -
Same as A959
Same as A961
7-16
E6582062
Default
setting
*3
1