Toshiba TOSVERT VF-AS3 Instruction Manual page 404

6. 33. 3
<F681: Terminal FM switching>
<F682: Terminal FM inclination polarity>
<F683: Terminal FM bias>
<F684: Terminal FM filter>
<F685: Terminal FM upper-limit level>
<F686: Terminal AM switching>
<F687: Terminal AM inclination polarity>
<F688: Terminal AM bias>
<F689: Terminal AM filter>
<F690: Terminal AM upper-limit level>
■ Function
4 With the setting of <F681>, you can switch the output signal from terminal [FM] to 0 - 1mAdc output,
0 - 20mAdc output, and 0 - 10 Vdc output. Default setting is 0 - 10Vdc output.
Similarly, the output signal from the terminal [AM] can be also switched.
4
■ Parameter setting
6
Title
F681
F682
9
F683
F684
F685
F686
F687
F688
F689
F690
■ Setting methods
To obtain 4 - 20 mAdc output, adjust <F683: Terminal FM bias> and <F688: Terminal AM bias>.
When using the optional frequency meter (QS60T), set <F681> to "0" or F686 to "0".
6. [Advanced] How to use parameters
Analog output adjustment
Parameter name
Terminal FM switching
Terminal FM inclination
polarity
Terminal FM bias
Terminal FM filter
Terminal FM upper-limit
level
Terminal AM switching
Terminal AM inclination
polarity
Terminal AM bias
Terminal AM filter
Terminal AM upper-limit
level
F681 : Terminal FM switching
0: Meter option (0-1mA)
1: Current output (0-20mA)
2: voltage output (0-10V)
Adjustment range
0: Meter option (0-1mA)
1: Current output (0-20mA)
2: Voltage output (0-10V)
0: Negative inclination (downward slope)
1: Positive inclination (upward slope)
-100.0 to +100.0
1 - 1000
0.0 - 100.0
0: Meter option (0-1mA)
1: Current output (0-20mA)
2: Voltage output (0-10V)
0: Negative inclination (downward slope)
1: Positive inclination (upward slope)
-100.0 to 100.0
1 - 1000
0.0 - 100.0
6-162
E6582062
STOP 0.0Hz
14:11
Unit Default setting
2
1
% 0.0
ms 1
% 100.0
2
1
% 0.0
ms 1
% 100.0