Toshiba TOSVERT VF-AS3 Instruction Manual page 142

8 Select a new setting value.
Select it by using the touch wheel, the [F2] key
and the [F3] key
In the example on the right, the setting value is
changed to "2: Output current."
9 Press the [OK] key.
The setting value is changed. The screen display
returns to the previous screen (previous one in the
4 hierarchy), and the screen of the panel parameter
is displayed.
Check that the number displayed at the right end of
the item <F710: Standard mode display> has been
changed ("0" -> "2" in the example on the right).
10 Press the [ESC] key.
The screen display returns to the previous one,
and the extended parameter screen is displayed.
9
11 Press the [F1] key ("Standard") and return to
[Standard mode].
In the example on the right, the display in
[Standard mode] has been changed to output
current (displayed in %). When you press the [F4]
key/[ESC] key, the mode is switched to [Monitor
mode].
Memo
4. [Basic operation] Operation methods of motor
.
• For details of the function and adjustment range of <F710: Standard mode display>, refer to [5.
4. 3].
,
F710 : Standard mode display
0: Output frequency
1: Frequency reference
2: Output current
3: DC Bus voltage
4: Output voltage
Extended parameters (F ---)
: Free unit bias
F706
: Step of panel setting
F707
: Step of panel display
F708
: Standard mode hold
F709
: Standard mode display
F710
F7 --
Extended parameters (F ---)
Operation parameters (F3 - -)
3.3
Motor parameters 1 (F4 - -)
3.4
Acc/dec parameters (F5 - -)
3.5
Protection parameters (F6 - -)
3.6
Panel parameters (F7 - -)
3.7
Top
Easy
4-18
E6582062
STOP 0.0Hz
15:08
STOP 0.0Hz
15:09
0.00Hz 0
0.00Hz
0
0
2
F8 --
STOP 0.0Hz
15:09
0
Monitor
STOP 0.0Hz
15:10
Standard Mode
0
%
Screen Copy Monitor