Toshiba TOSVERT VF-AS3 Instruction Manual page 33

Switching of grounding capacitor
(If necessary)
Mounting of front cover
Connection of peripheral devices
(when not wired in the inverter)
Check of safety measures
Power ON
Setting of initial power ON
Setting of LCD screen
Setting of parameters
Attachment of caution labels
Operation (trial run)
-> [2.3.4 Switching of grounding capacitor]
-> [2.2 How to remove covers of inverter]
-> [2.4.1 Motor], [2.4.2 Inverters], [2.4.3 What to do about
leakage current]
Only at the initial power-on, the following settings are required.
<SEt: Region setting check> -> Quick start, [5. 3. 10 Automatic
setting of main parameters by region used]
<AUL: Multi-rating select> -> [1.2 Multi-rating], [5. 3. 2 Selecting an
overload protection characteristic]
-> [3.1.3 Setting of LCD screen]
-> [Chapter 4], [Chapter 5], and [Chapter 6]
When "Auto-restart" or "Retry" is set, attach caution labels to
the inverter, motor, and equipment.
->[ I. Cautions for safety], Quick start
1-15
E6582062
1
3
9
10
1. Read first