Toshiba TOSVERT VF-AS3 Instruction Manual page 131

2 Set the value with the touch wheel.
The first, second, and third digits from the right are
changed between "0" to "9." The fourth digit from
the right is changed among "0", "A", and "C."
The values are carried or borrowed.
For example, if the third digit from the right is
increased to above "0900," then "A000" is dis-
played and increased to "A100", "A200" and so on.
3 Press the [OK] key.
The setting screen of the selected parameter is dis-
played.
4 Press the [ESC] key.
The screen returns to the direct access screen.
• For the communication number of each parameter, refer to Chapter 11.
Memo
• For details of the concrete function and adjustment range of each parameter, refer to Chapters
5 and 6.
3) Guidance function <AUF>
Parameters required for a special purpose can be
displayed as a group and set collectively.
You can set necessary parameters easily by setting
parameter groups in turn that are automatically
formed for special purposes.
Purpose-specific guidance such as Embedded
Ethernet setting, Preset speed operation, Motor 1,2
switching, and Motor parameter is provided.
Parameter setting
Title Parameter name
AUF Guidance function
Set the communication number
: Ambient temperature
F634
Top View
F634 : Ambient temperature
3: +21 to +30
2. +31 to +40
3. +41 to +50
4. +51 to +60
5. -15 to +10
Embedded Ethernet
3.1
Preset speed guidance
3.2
Analog signal operation guidance
3.3
Motor 1,2 switching guidance
3.4
Motor parameter guidance
3.5
Top
Adjustment range
0: -
1: Embedded Ethernet setting
2: Preset speed operation
3: Analog frequency command
4: Motor 1,2 switching
5: Motor parameter
6: PM motor parameter
4-7
4. [Basic operation] Operation methods of motor
E6582062
STOP 0.0Hz
14:03
Direct access
0 6 3 4
3
Monitor
STOP 0.0Hz
14:03
℃
℃
℃
℃
℃
STOP 0.0Hz
14:33
Guidance function
Monitor
Default
setting
0
3
4
9