Toshiba TOSVERT VF-AS3 Instruction Manual page 115

(4) The functions assigned to the [F1] - [F4] keys are displayed.
For details, refer to [3. 1. 1].
■ Screen display of [Easy mode]
This is a display mode to set parameters easily.
It is displayed in the following cases.
• When "Easy" of the [F1] - [F3] keys is pressed in [Setting mode] and [Monitor mode]
• When [Easy mode] is set in <PSEL: Parameter mode select>
Only the parameters set in <F751: Easy setting 1> - <F782: Easy setting 32>. For details, refer to [5.
2. 8].
Memo
• For details of how to set parameters, refer to [4. 2. 3].
■ Screen display of [Monitor mode]
This is a display mode to monitor the inverter status (output current, input voltage, terminal
information, etc.).
(1) From the operation status to the current time, this mode has the same display as [Standard
mode].
(2) The current display mode [Monitor mode] is displayed.
(3) The monitor items are displayed. One screen can display up to five items.
"Left end": Monitor item name
"Right end": Value, status
STOP 0.0Hz
Easy Mode
: Run command select
CMOd
: Freq command select 1
FMOd
: Acceleration time 1
ACC
: Deceleration time 1
dEC
: Upper limit frequency
UL
Top Setting
(1)
STOP
Monitor Mode
(2)
Direction of rotation
Output frequency
Output current
(3)
Input voltage (DC detection)
Output voltage
Top Easy
(4)
3-11
17:13
1
10
10.0s
10.0s
60.0Hz
Monitor
0.0Hz
17:13
Forward
0.0Hz
0%
116%
0%
Setting
3. [Basic operation] Operation panel and screen display
E6582062
3
9
10