Table of Contents
Advertisement
9TGOMX.()18
FRONT AXLE
Wheel hub
Caution
• Do not drop the bearing inner race.
1 . Remove the wheel hub from the steering knuckle.
Installation Note
Hub nut
M
1 . Temporarily install the hub nut to the specified torque.
Tightening torque:
29-39
N·m
(3-4
m-kg,
22-29 ft-Ib)
2. Turn the wheel hub several times to seat the bearings fully.
3. Loosen the hub nut until it can be turned by hand.
4. Attach a pull scale to a wheel hub bolt, and measure the
frictional force while turning. Tighten the locknut until the
preload is as specified.
Preload: Frictional force plus
11-30 N (1.1-3.0 kg, 2.4-6.6Ib)
M-7
Advertisement
Table of Contents
Troubleshooting
