Magnetic Valve - Ford TRADER Workshop Manual

F2 .
-_
...
_---
A
F2-50
EXHAUST CONTROLLED HEATING SYSTEM
9TGOF2·131
9TGOF2·132
A
Installation
Note
• After installing the exhaust brake unit, the vacuum
warning buzzer may ring until vacuum is built up.
Install in the reverse order of removal.
Tightening torque:
19-25 N·m (1.9-2.6 m-kg, 14-19 ft-Ib)
MAGNETIC VALVE (FOR EXHAUST SHUTTER VALVE)
Removal
1 . Remove the vacuum hose from the magnetic valve.
2. Disconnect the connector from the magnetic valve.
3. Remove the magnetic valve.
Inspection
1. Verify air flow through the valve.
A-B: Flow
A-C: No flow
B-C: No flow
2. Connect 12V to the valve and verify air flow.
A-B: No flow
A-C: Flow
B-C: No flow
Installation
Note
• After installing the magnetic valve, the vacuum
warning buzzer may ring until vacuum is built up.
Install in the reverse order of removal.
Tightening torque:
43-61 N·m (4.4-6.2
m-kg, 32-45 ft-Ib)