Table of Contents
Advertisement
T
BACKING WARNING HORN
BACKING WARNING HORN
BACKING WARNING HORN
Removal
I
Installation
1. Remove in the order shown in the figure.
2. Install in the reverse order of removal.
1. Connector
9TGOTX·139
T-74
9TGOTX·138
2. Backing warning horn
.
Inspection ................................... page T-74
Inspection
1 . Disconnect the connector from the backing warning horn.
2. Connect the battery to the backing warning horn as shown
in the figure ..
3. Verify that the horn operates.
4. Replace the backing warning horn if not as specified.
Advertisement
Table of Contents
Troubleshooting
