Ford TRADER Workshop Manual page 320

INTAKE AIR SYSTEM
F3
INTAKE AIR SYSTEM
COMPONENTS
Removal/Inspection /Installation
1. Remove in the order shown in the figure.
2. Inspect all parts and repair or replace as necessary.
3. Install in the reverse order of removal.
3.4-5.4 Nom (35-55 em-kg, 30-48 in-Ib)
Hi-25
(1.9-2.6,
14-19)--_~
REPLACE
--==;;~~:21
GASKET
7.8-11
N-m
(80-110 em-kg,
69-95 in-Ib)
7.8-12 N-m
(80-120 em-kg.
69-104 in-Ib)
22-30 (2.2-3.1. 16-22)
19-25 (1.9-2.6, 14-19)
1. Fresh air duct
Check for contamination, cracks and other
damage
Installation Note ........................ page F3-16
2. Air cleaner
Inspection ................................. page F3-10
3. Intake shutter valve
Inspection ................................. page F3-40
4. Air heater
Inspection ..................................... Section G
S.Seal cover
Visually check the seal cover for contamina-
tion, cracks or other damage
N-m
(m-kg. ft·lb)
9TGOF3·034
6. I njection pipe
Check for contamination, cracks and other
damage
7. Fuel filter
Replace element... .................... page F3-24
8. I ntake manifold
Check for contamination, cracks and other
damage .
Installation Note ........................ page F3-16
F3-15