Oil Pan Upper Block; Oil Pan - Ford TRADER Workshop Manual

B
APPRox.~-==l==-
40mm
(1.6 in) _- __
-j-__
B-1 00
OIL PAN REAR GASKET
OIL PAN UPPER BLOCK
9TG082·282
OIL PAN FRONT GASKET
TIMING GEAR CASE
CYLINDER BLOCK
9TOO82·283
9TG082'285
ASSEMBLY
Oil Pan
U~per
Block
Caution
• The oil pan upper block must be secured within 30
minutes after the sealant is applied.
1 . Apply silicone sealant as shown to the shaded areas of a
new oil pan gasket (front and rear).
2. Install the gaskets onto the cylinder block.
3. Apply silicone sealant to the shaded areas of the cylinder
block.
4. Install the oil pan upper block and a new gasket.
Tightening torque:
. 19-25 N·m (1.9-2.6 m-kg, 14-19 ft-Ib)
Oil Pan
1. Install the oil pan and a new gasket.
2. Install the stiffener.
Tightening torque
HA: 16-23 N·m (1.6-2.3 m-kg, 12-17 ft-Ib)
SL: 19-25 N-m (1.9-2.6 m-kg, 14-.19 ft-Ib)