Table of Contents
Advertisement
BRAKE SYSTEM
p
WHEEL CYLINDER
Disassembly
I Inspection I
Assembly
1 . Disassemble in the order shown in the figure.
2. Assemble in the reverse order of disassembly.
3. Inspect all parts and repair or replace as necessary.
Caution
• Do not let foreign material enter the cylinder.
9TGOPX.()84
1. Spring
I nspect for deformation or weakness
2. Adjusting screw
3. Pistons
6. Feeling block
7. Spring
Inspect for deformation or weakness
8. Bleeder cap
I nspect for damage
4. Dust boots
9. Bleeder screw
10. Steel ball
5. Piston rubber cups
P-31
Advertisement
Table of Contents
Troubleshooting
