Ford TRADER Workshop Manual page 523

M
REAR AXLE
Oil seal
1. Apply grease to the lip of the new. oil
s~al..
.
2. Install the oil seal into the axle housing with a suitable pipe
and a hammer.
9TGOMX·097
Disassembly I Inspection I Assembly
1. Disassemble in the order shown in the figure, referring to Disassembly Note.
2. Inspect all parts and repair or replace as necessary.
3. Assemble in the reverse order of disassembly. referring to
Assembly Note.
1. Bearing inner race (Outer)
Inspect for damage and rotation
2. Oil seal
Assembly Note .......................... page M-19
3. Bearing inner race (Inner)
Inspect for damage and rotation
4. Bearing outer race (Inner)
Disassembly Note ...................... page M-19
Assembly Note .......................... page M-19
M-18
5. Bearing outer race (Outer)
Inspect for damage or wear
9TFOMX'()12
Assembly Note .......................... page M-19
6. Wheel hub
7. Hub bolt
Disassembly Note ...................... page M-19