Sub-Starter System; Installation Starting System - Ford TRADER Workshop Manual

G
G-16
STARTER
SUB-STARTER SYSTEM
Installation Starting System
1. Place the transmission in neutral and turn the engine switch
ON.
2. Depress the sub-starter switch and verify that the engine
starts.
3. If the engine does not start, check the neutral switch, sub-
starter switch, and wire harness. .
Inspection
Neutral switch
1. Disconnect the neutral switch connector.
2. Check continuity between terminals A and B.
Transmission Continuity
Neutral
Yes
In gear No
Sub-starter switch
1. Disconnect the sub-starter switch connector.
2. Check continuity between terminals of the switch.
Sub-starter switch Continuity
ON Yes
OFF
No