Table of Contents
Advertisement
p
P-40
PARKING BRAKE SYSTEM
9TFOPX-01a
CENTER BRAKE
On-vehicle Inspection
Lining thickness and drum inner diameter
1 . Jack up the vehicle and support it with safety stands.
2 . Remove the center brake drum. (Refer to page P-41.)
3 . Inspect the drum inner diameter.
Diameter: 190mm (7.48 in)
Limit
: 191 mm (7.52 in)
4. Visual inspect the lining thickness .
.
~.
Thickness: 3.6mm (0.14 in)
Limit
: 1.0mm (0.04 in)
Adjustment
Center brake shoe clearance
1. Remove the plug.
2. Place a screwdriver against the adiuster through hole and
turn the adjuster in the direction of the arrow until the drum
is locked.
3. Turn the adjuster in the reverse direction from the locked
position
6-7
notches.
Replacement
Replacement of center brake shoe
Refer to page P-41.
9TFOPX-Q19
Advertisement
Table of Contents
Troubleshooting
