Wheel Lug Nut Torque; Tire Information - Ford F-650 2011 Supplement Manual

WARNING: Use only the same type and style wheels and
mounting hardware to replace original parts. Failure to do so
may result in an assembly that looks fine, but does not fit together
properly. This could possibly cause wheel or fastener failures which
could result in property damage, personal injury or death.
Note: Do not attempt to mix stud-piloted wheels or fasteners with
hub-piloted wheels or fasteners.
Note: Do not change from aluminum wheels to steel wheels or
vice-versa without changing the mounting hardware required or, with
flange-nut mounting systems, changing the hub and stud assembly.
WHEEL NUT TORQUE
Size Nut mounting
22 mm Flange
Note: Do not use lubrication on dry threads. Where excessive corrosion
exists, a light coat of lubricant on the first three threads of the stud bolt
is permitted. Keep lubricant away from:
• Hex nut and rim clamp contact surfaces.
• Cap nut ball face and ball seat on the disc wheel.
• Flange nut washer surface and flat on the disc wheel.

TIRE INFORMATION

Inflation
WARNING: Always maintain your tires in good condition.
Frequently check and maintain correct inflation pressures as
specified by tire manufacturers. Inspect periodically for abnormal wear
patterns and repair/replace cut or broken tire casing. Always use
experienced, trained personnel with proper equipment and correct
procedures to mount or remove tires and wheels. Failure to adhere to
these warnings could result in wheel or tire malfunction, damage to
your vehicle, personal injury, or death.
2011 F-650/750 (f67)
Supplement, 2nd Printing
USA (fus)
Maintenance and Specifications
ft-lb
450–500
Torque
N•m
610–678
229