Ford TRADER Workshop Manual page 562

N
MANUAL STEERING
Disassembly 11nspection
I
Assembly
1. Disassemble in the order shown in the figure, referring to Disassembly Note.
2. Inspect all parts and repair or replace as necessary.
3. Assemble in the reverse order of disassembly, referring to Assembly Note.
Note
• Before disassembling, clean throughly and drain the gear oil through the filler port.
1. Filler port plug
2. Locknut
3. Pitman arm
Disassembly note ....................... page N-30
Assembly note ........................... page N-36
4. Side cover
Disassembly note ....................... page N-30
Inspect bushing for damage and corrosion
Assembly note ........................... page N-34
5. Sector shaft
Disassembly note ....................... page N-30
Inspection ................................... page N-18
Assembly note ........................... page N-34
N-16
. ADJUSTING SHIM
29-39
~(3.CI-4.0'22-29
~_'l~~44-S4
(4.5-5.5, 33-40)
ADJUSTING SCREW
Nom (m-kg, ft·lb)
9TGONX.Q31
6. Adjusting plug
Disassembly note ................. page N-17
Assembly note ..................... page N-19
7. Worm ball nut assembly
Disassembly note ................. page N-17
Inspection ............................ page N-18
Assembly note ..................... page N-19
8. Gear housing
Disassembly note ................. page N-18
Inspect bushing for damage and corrosion
Assembly note ..................... page N-19, 20